신라포장기계

고객과의 신뢰를 최우선으로!

신라포장기계는 완벽한 재고관리를 바탕으로 철저한 A/S를 통한 고객의 신뢰를 위해 끊임없이 노력하고 있습니다.

7CM-TS

페이지 정보

profile_image

본문


7cm-ts_001.png

The world fastest Bag Making & Filling System
All operation from PE roll unwinding to finished bag (filled bag with its bag top sealed) delivery conveyor is performed in one consecutive process. There whole process, including bag making, products filling and bag top sealing, is automatic and controlled on the panel (operated by PLC unit installed inside). The machine incorporates a net weigher with a high-speed chute, operates at maximum speed of 1,650 bags per hour (based on filling 25 kg weight rate of resin pellet).


Catalog Download



Max. Capacity (bags/hour) 1650 (based on filling 25 kg weight rate of resin pellet)
Bag Materials Mono-polyethylene tube roll with gusset
Filled Weight (kg) 25
Empty Bag Size (mm) L700-850 ✕ W380-460 ✕ GW35-80
Distance between gussets (mm) standard 260
Bag Bottom Seal Impulse seal
Bag Mouth Seal Impulse seal
Corner Seal Hot plate
Air consumption (Nℓ/min.) 1270 (0.5MPa)
Power Required (kW) Approx.24
Outer Diameter (mm) Max.1400
Inside Core (mm) 150
Film Thickness (mm) 0.08-0.2

CONSTRUCTION


Bag Making Station
- Drawing Unit/Dance Rollers: Keeping adequate web tension and bag length, it draws web to downstream.
- Pin-hole Device: Perforating vent pin-holes on the bag to get-off air during palletizing after filling bags.
- Corner Sealing Unit: Sealing corners of bags for optimum bag shape to get the stability of bags.
- Bottom Sealing/Cooling Unit: Sealing bag bottom, cutting for bag mouth and cooling the bottom.

Products Filling Station
- Bag Clump/Opening Unit: Bag clamp bars hold bags and open the bag mouth.
- Filling Chute/Spout: Filling the weighed products into bags through spout inserted into the bag mouth.
- Top Sealing/Cooling Unit: Sealing and then cooling the bag top firmly before discharging bags.


7cm-ts_002.png
Total 17건 1 페이지

검색